How many solar panels does it take to power a house?
You can calculate how many solar panels you need by dividing your yearly electricity usage by your area's production ratio and then dividing that number by the power output of your solar panels. Let's break that down a bit:
Calculating how many solar panels you'll need to meet your energy needs depends on several factors. The easiest way to find out how many panels you'll need is to use our Solar Calculator. When you put in your address and estimated monthly power bill, we'll do all of the math for you so that you can make an informed decision. If you'd like to do those calculations, we've explained our formula below to help.
The formula we used to estimate the number of solar panels you need to power your home depends on these critical factors. Here are the assumptions we made and how we did our math:
Annual electricity usage
Your annual electricity usage is the energy you use in your home over a year. Measured in kilowatt-hours (kWh), this number is influenced by the appliances in your home that use electricity and how often you use them. Refrigerators, air conditioning units, small kitchen appliances, lights, chargers, and more all use electricity.
According to the U.S. Energy Information Administration (EIA), the average American household uses 10,632 kWh of electricity per year (or 886 kWh per month), so we'll use that number as the ideal solar panel system or solar array size, which would mean you could offset 100 percent of your electricity usage and utility bill with solar panels (in practice, it's not this neat, but bear with us here). To get a more exact number based on how much energy you use, check last year's electric bills to determine your average electricity consumption. Once you have that number, plug it into the equations below.
Solar panel wattage
Also known as a solar panel's power rating, panel wattage is the electricity output of a specific solar panel under ideal conditions. Wattage is measured in watts (W), and most solar panels fall in the 300 – 400+ W of power range. We'll use 400-watt panels in these calculations because 390-400 W is the most quoted capacity range on the EnergySage Marketplace, according to our latest Intel Report.
Production ratios
A solar panel system's production ratio is its estimated energy output over time (kWh) to its actual system size (W). These numbers are rarely 1:1 – depending on how many hours of sunlight your system will get (primarily based on your geographic location), your production ratio will change accordingly.
For example, a 10 kW system that produces 14 kWh of electricity in a year has a production ratio of 1.4 (14/10 = 1.4) – this is an entirely realistic production ratio to see out in the real world. In the U.S., production ratios are usually anywhere from 1.1 to 1.7, so we'll use those two numbers as the high and low estimates for our calculation.
Q: I’m interested in installing a solar panel system for my home, but I don’t know much about solar panels. How effective are they? How many solar panels power a house?
A: There are plenty of incentives and benefits for switching from a traditional utility system to a solar-powered one. There are rebates and tax credits, but also the knowledge that you’re helping improve the environment. If you’re wondering, “How many solar panels do I need?” a few essential elements will answer the question. The tips below will help walk you through calculating how many solar panels you need and what factors will affect that number. While calculating these numbers yourself can give you an idea of what kind of solar array you’ll need, know that a qualified solar panel installer will do all of these calculations for you if you proceed with installing solar panels.
You’ll need to know three things: your annual energy usage, the solar panel wattage, and the production ratio.
”How much solar do I need?” is an expected question from a homeowner new to solar systems. To figure out exactly how many panels are required to run a home, you will need to consider your annual energy usage, the solar panel wattage, and the production ratio. These three factors are essential when converting to a solar system. While this calculation will give you a ballpark estimate, consider that other factors will affect the actual number of panels, which will be touched on later.
If you’re looking to install a designated solar heating system—one where solar panels heat liquid or air and convert it into central heating for a home—you’ll also need an experienced HVAC installer who can convert your existing central heating system to a solar heating one.
Want to install solar panels on your home?
Maybe it's time to call in a solar energy pro. Get free, no-commitment estimates from experts near you.
Find a Pro+
Look at your utility bill to determine how many watts you use.
Energy usage is measured in kilowatt-hours (kWh). KWh does not mean the number of kilowatts you use in an hour, but rather the amount of energy you would use keeping a 1,000-watt appliance running for 1 hour. The number of appliances that use power and how often they’re running will affect the usage. Anything plugged into a wall will count toward your energy usage, and bigger appliances like refrigerators and dishwashers use more power than a phone charger. For example, a 50-inch LED television uses around 0.016 kWh per hour, whereas an electric dishwasher will use about 2 kWh per load.
As of 2019, the average American household uses 10,649 kWh of electricity per year, according to the U.S. Energy Information Administration. But the best way to determine how much power you’ll need is by looking at your utility bills from the past year. This will give you a solid idea of your real-life energy needs, especially as power usage fluctuates throughout the year. The amount of energy you use will dictate the size of the system you need.
While installing solar panels can often reduce or even completely offset your monthly electric bill, remember that electric rates and usage are volatile factors. If the price of electricity or the amount you use drastically changes, your savings could change as well. For example, central to southern California is considered a great place to install solar panels because of the frequent sun—but it also is a state that regularly sees higher electricity prices.
Once you know your home’s energy demands, it’s time to start looking at panels. Look at different panels and see what the wattages are. The solar panel wattage is also known as the power rating, and it’s a panel’s electrical output under ideal conditions. This is measured in watts (W). A panel will usually produce between 250 and 400 watts of power. For the equation later on, assume an average of 320 W per panel.
Use your annual energy consumption and solar panel rating to calculate the production ratio.
You can calculate the production ratio when you have the numbers for your annual energy usage and the solar panel wattage. The production ratio is a system’s estimated energy output over time (measured in kWh) compared to the actual system size (measured in W). To calculate the production ratio, divide the energy output by the system’s total wattage. In the U.S., production ratios tend to fall between 1.3 and 1.6.
Want to install solar panels on your home?
Maybe it's time to call in a solar energy pro. Get free, no-commitment estimates from experts near you.
Find a Pro+
Once you have these three numbers, it’s time to calculate the number of panels. The formula is:
Number of panels = system size / production ratio / panel wattage
For example, using 10,649 kWh (the average energy usage of an American household), 1.3 (the low end of common production ratios), and 320 W (the average wattage of a solar panel):
Number of panels = 10,649 kWh / 1.3 / 320 W = 25.6
From this calculation, you can estimate that a house with these power requirements would need about 25 panels that produce 320 W.
Take the amount of sun your home receives into consideration.
Remember that this calculation assumes that the panels are running under optimum conditions. More direct sunlight means your home can convert more energy into electricity. In states like Arizona and New Mexico, which are known to produce more sunlight than states in the Northeast, homeowners will likely need fewer solar panels. Nevada, Utah, California, Texas, and Colorado are other locations that usually produce more sunlight. But even if you live in a region or state with long winters or one that’s outside of the Sun Belt, you may need to purchase more solar panels to effectively run the home.
The size, shape, and material of your roof will also affect the best placement of solar panels. The ideal roof has no shade coverage from trees and large amounts of space facing south, west, or east—these are the directions that receive the most sunlight throughout the day in the northern hemisphere. Roofs with steep pitches make installing solar panels more difficult and can mean that an installer may not be able to fit as many panels on the roof. The same goes for oddly shaped roofs.
The number of solar panels you need will also depend on if your home will be on-grid or off-grid.
Often the more popular option, on-grid solar panel systems are connected to the public utility grid. If there isn’t enough sun to provide full power, the house can pull energy from the traditional grid, so it doesn’t have to go without electricity. On the other hand, an off-grid system is not connected to the public grid and is more common in rural or remote locations.
Off-grid systems rely on batteries to store power to keep the house running at night or on cloudy days. Off-grid systems will likely need more panels to run the house and store up excess energy. On-grid or off-grid systems can affect the overall cost of your solar power system.
Figuring out how much solar battery capacity you need is a task unto itself. Not enough capacity and you’ll run out of power in the middle of the night, but too much and you’ll add unnecessary complexity and maintenance costs. The number of batteries you need will also depend on the type of battery you choose. Lead acid batteries are more cost-effective, but lithium-ion batteries have better capacity, efficiency, and lifespan.
Want to install solar panels on your home?
Maybe it's time to call in a solar energy pro. Get free, no-commitment estimates from experts near you.
Find a Pro+
The type of solar panel will affect its efficiency.
There are three types of solar panels available: monocrystalline, polycrystalline, and thin film. Monocrystalline and polycrystalline panels are both composed of cells made out of silicon. The silicon pieces are assembled to form a rectangle and covered with a glass sheet. Monocrystalline solar cells are cut from a single silicon crystal, while polycrystalline cells are composed of fragments of silicon crystals. This difference in construction affects the efficiency and price. Monocrystalline panels are more efficient and perform better, but they’re also more expensive. Polycrystalline solar panel prices are more affordable, but you’ll compromise a bit on efficiency and performance.
There are also thin-film solar panels. Like the name suggests, the cells are thinner than monocrystalline or polycrystalline. However, the actual panel itself may not be significantly thinner than other styles of panels. Thin-film panels are more portable and flexible than either monocrystalline or polycrystalline, but they’re less efficient. Different panels will have different pros and cons depending on your home, geographic location, and more, and your solar installer will be able to give you advice on what’s best suited for you.
While this guide can give you general information about the number of panels, solar panel sizes, and types of systems you might consider, remember that a qualified solar power installer will be able to give you more information that’s specific to your home. Many variables play into how efficient solar systems are, and it can be difficult to take all of those into consideration when you’re not experienced.
Find trusted local pros for any home project
Find Pros Now+